Насочен насложувач SWT Vibro Hammer Sheet Pile Driver

Pile Driver is a popular excavator attachment for sheet pile jobing. It can pull out the sheet pile or drive into the foundation with very higher effiency with its vibrate power. It is necessary and widly used in buliding construction,dridge,offshore industries.

User tips for using excavator vibro hammers

(1). The first week is the Running In period to a new vibro hammer. The gear box oil should be changed one day after working, then change two times each 3 days, which means the oild should be changed total 3 times in the first week Running In Period.

(2). After Running in period (the first week), the oil should be change every 200 working hrs, which should be not more than 500hrs or 6 months. The machine should be cleaned while maintenance.

(3). After the sheet pile is pushed into the right deepth, better to loose the clamp at least 5 seconds later,which can reduce the clamp wearing and extend its working life.

(4). Everyday before working, please check if any bolts on the machine were loosen and it should be greased regularly.